Skip to main content
2024-11-15 | IFPEB, GlobalABC, ADEME, A4MT
GlobalABC Sufficiency Hub

The Sufficiency Action Hub aims to demonstrate the necessity, feasibility, and social desirability of sufficiency measures in the building sector, fostering a shared understanding across decision-making levels. Its goal is to build a diverse community of stakeholders worldwide, from various sectors of the building value chain, to adapt sufficiency solutions to different contexts, recognizing disparities between the Global North and South. Launched by the French Institute for Building Performance and supported by key institutions like ADEME, the initiative seeks to address the environmental challenges posed by the building sector, which is responsible for 21% of global greenhouse gas emissions. The Action Hub highlights the urgent need for sufficiency measures, advocating for a systemic approach that integrates demand-side policies to reduce resource consumption, mitigate emissions, and ensure social equity. Through international collaboration and the adoption of the "Sufficiency First" principle, the initiative aims to reshape the future of the building sector within planetary boundaries. The Action Hub has recently published a report outlining the key findings of its ongoing work and initiatives.  

2024-10-07
Ministry of Housing and Public Works, People’s Republic of Bangladesh

Climate Action Roadmaps for Buildings and Construction Bangladesh has been launched by the Ministry of Housing and Public Works, People’s Republic of Bangladesh, on 7 October.

This roadmap follows the Global Alliance for Buildings and Construction (GlobalABC) framework, developed through a partnership between the United Nations Environment Programme (UNEP), the United Nations Human Settlements Programme (UN-Habitat) and the United Nations Office for Project Services (UNOPS). It emphasizes reducing emissions and improving resilience across the entire life cycle of buildings, and sets ambitious short-, medium-, and long-term targets for decarbonizing the built environment, aligned with the Marrakech Partnership for Global Climate Action. The roadmap is centred around four main cross-cutting objectives: (1) zero embodied carbon; (2) zero operational carbon; (3) adaptation; and (4) well-being and inclusion.

Download the roadmap below

2024-09-25
BPIE

The 2024 Energy Performance of Buildings Directive (EPBD) recast introduces more stringent provisions for EPCs and establishes a framework for renovation passports as an additional voluntary tool to provide a clear roadmap for staged deep renovations. In accordance with Article 12 of the EPBD, Member States are required to put in place a renovation passport scheme by 29 May 2026 based on the common framework set out in Annex VIII of the EPBD.

The iBRoad2EPC project has developed a flexible, adaptable and modular model renovation passport that provides a set of solutions that can be immediately applied to the transposition and/or implementation of a number of EU policy instruments.

The present report includes a detailed analysis of how iBRoad2EPC can support and facilitate the implementation of each article of the EPBD and its requirements for the renovation passports as set in Annex VIII, as well as the Renovation Wave strategy, the Energy Efficiency Directive (EED) and the Renewable Energy Directive (RED). The analysis then informs concrete actions to maximise the uptake of iBRoad2EPC to achieve the EU’s decarbonisation goals.

The iBRoad2EPC EU roadmap thus provides guidance to policymakers on how to optimally prepare the ground for national roll out and maximise the use of iBRoad2EPC to accelerate deep renovation in the EU. It thereby provides recommendations for improving the implementation of related Directives or amending the regulatory framework to promote deep renovation, and how to best use iBRoad2EPC for this purpose.

Download the report 

2024-03-07 | BPIE, UCL
GlobalABC/UNEP

The Global Status Report for Buildings and Construction (Buildings-GSR), a report published by the UN Environment Programme (UNEP) and the Global Alliance for Buildings and Construction (GlobalABC), provides an annual snapshot of the progress of the buildings and construction sector on a global scale. The Buildings-GSR reviews the status of policies, finance, technologies, and solutions to monitor whether the sector is aligned with the Paris Agreement goals. It also provides stakeholders with evidence to persuade policymakers and the overall buildings and construction community to take action.

As outlined in the latest edition, the buildings and construction sector contributes significantly to global climate change, accounting for about 21 per cent of global greenhouse gas emissions. In 2022, buildings were responsible for 34 per cent global energy demand and 37 per cent of energy and process-related carbon dioxide (CO2) emissions.

d

Policy progress is evident with more comprehensive climate action plans covering buildings and construction in Nationally Determined Contributions (NDCs). However, few align with net-zero operational emissions, and while over 81 countries have building energy codes, many are outdated.Investment in building decarbonisation exceeded US$285 billion in 2022 but is expected to decline in 2023, largely due to a less favourable investment environment due to rising costs. The necessary increase in investments falls short of the net-zero targets for new and existing buildings by 2030 and 2050, respectively.

The 2022 update of the Global Buildings Climate Tracker (GBCT) paints a concerning picture: the gap between the current state and the desired decarbonisation path is significant. To align with the 2030 milestone, an annual increase of ten decarbonisation points is now required, a substantial jump from the six points anticipated per year starting in 2015.

d

The GBCT shows a negative rebound since 2020 in the decarbonization of the buildings sector, with increased energy intensity and higher emissions. The gap between the actual climate performance of the sector and the necessary decarbonization pathway is widening. The lack of structural or systemic decarbonisation improvement in the building sector leaves its emissions reductions vulnerable to external factors.

To reach the goals of net-zero carbon emission buildings for new buildings by 2030 and existing buildings by 2050, stronger policies are needed to enhance energy efficiency and address carbon emissions from building materials and construction. National efforts are crucial, with countries forming coalitions to share best practices and promote low-carbon construction.

This year, the deep dive chapters are the following: Adaptation and resilient construction methods; Innovations in business cases (renovation and green building construction industry); and Nature-based solutions and biophilic design.

A welcome development in 2023 was the Buildings Breakthrough launched at COP28, to coordinate between countries to make clean technologies and sustainable solutions in the buildings and construction sector the most affordable, accessible, and attractive option in all regions by 2030.

Looking forward to 2024, the focus must be on tangible emission reductions, enhancing building performance, increasing renewable energy use and addressing housing and energy access disparities. Despite the complexities, strategic partnerships can facilitate the shift to an efficient, resilient and whole life net-zero carbon global building stock.

 

Download the social media kits in all UN languages

2023-10-18 | Carbon Neutral Cities Alliance
Carbon Neutral Cities Alliance

Built by Nature strategic partners Carbon Neutral Cities Alliance have collaborated with One Click LCA to provide relevant and practical on-line training as a comprehensive introduction to life cycle assessment, embodied carbon, biobased materials and circularity in construction.

This is a free and open resource designed for City Officers, and is an important component of the project "Dramatically Reducing Embodied Carbon in Europe's Built Environment", funded by Laudes Foundation and Built by Nature. One Click LCA is the first and best easy and automated life cycle assessment software that helps you calculate and reduce the environmental impacts of your building & infra projects, products and portfolio. Our software helps designers, builders, manufacturers and investors to identify the most effective ways to decarbonise their construction projects, products and portfolios. It is used in more than 100 countries, includes the world’s largest construction sector database, integrates with over a dozen design tools and supports over 50 standards and certifications.

This programme will delve into the key topics, findings, and actionable suggestions that will empower city practitioners to drive carbon reduction initiatives. Enroll now to access videos, learning sessions, and receive a certificate of completion -- with coursework and materials available in English, French and Spanish. 

Please visit the academy webisite here.

2023-06-22
Danfoss

This issue of Danfoss's white papers presents a roadmap for decarbonizing cities. Cities account for two-thirds of global energy consumption and more than 70% of annual global carbon emissions. With more than half of the world’s population living in cities today – a number expected to increase to almost 70% in 2050 – we will not reach the goals of the Paris Agreement without a deep decarbonization of cities.

Read the key messages here.

2023-04-06 | OECD
OECD Regional Development Papers

About 90% of homes in the Netherlands depending on natural gas for heating, the Netherlands has made a commitment to phase out natural gas by 2050. To achieve the goal, the Netherlands has rolled out a natural gas-free pilot programme in 66 neighbourhoods. These neighbourhood pilot projects enabled municipalities to learn what it takes to start energy transition.

Based on a city survey carried out across 26 local governments, key findings from this report call on national and local governments joining up their efforts to take place-based measures.

This paper is the first case study applying the policy framework presented in the OECD report Decarbonising Buildings in Cities and Regions published in March 2022. The present case study provides a deep dive into the Netherlands’ experience to demonstrate the potential of cities and regions to advance the decarbonisation of buildings.

Read the paper here.

2022-11-10 | Stéphane Quefelec
European Environment Agency

This briefing by the European Environment Agency explores the nexus between climate change adaptation and mitigation, and the health and social justice aspects of cooling Europe’s buildings. It focuses specifically on residential buildings. The briefing is based on a literature review by Ramboll commissioned by the EEA, discussions held with members of the European Environment Information and Observation Network (Eionet), input from individual experts and information from other EEA publications.

Read the briefing here

 

2023-02-14
Architecture 2030

The CARE (Carbon Avoided: Retrofit Estimator) Tool is used for estimating and comparing the embodied, operating, and avoided carbon impacts and benefits of reusing and upgrading existing buildings or replacing them with new construction. The CARE Tool allows users to compare the total carbon impacts of renovating an existing building vs. replacing it with a new one.

The CARE Tool is an Architecture 2030 Project. 

2022-11-21
Ministry of Urban Development and Housing, Ski Lanka

This report - Sri Lanka Roadmap for Sustainable Housing and Construction 2020 – 2050 - presents the findings of the Sustainable Building Construction Country Assessment for Sri Lanka (SBC-CA) and a Roadmap for Sustainable Housing and Construction and achieving NDCs in the construction industry in Sri Lanka. It examines the current status, and potential opportunities and challenges for adopting Sustainable Building Construction (SBC) practices and policies. The Country Assessment and the Roadmap are structured on the approach laid out by the ‘Global Alliance for Building Construction (GlobalABC) Roadmap for Buildings and Construction 2020-2050, where 8 Action Areas have been identified for the transition towards sustainability in the Construction Sector: Urban planning, New Buildings, Existing Buildings, Building Operations, Appliances and Systems, Materials, Resilience, and Clean Energy.

Download the roadmap here.